2023-11
To be honest, it is difficult to completely remove layering lines. Because polyester resin is not cured in one go, it is…… [More]
2023-11
How long does it take for the mold adhesive to solidify properly? Generally speaking, taking the common ethylene b…… [More]
2023-11
Generally speaking, it is recommended that the wet film thickness of the mold gel coat be 0.8-1mm, which is most suit…… [More]
2023-11
Release agent is a functional substance that lies between the mold and the finished product. It is a type of proc…… [More]
2023-11
Generally speaking, the resin content of hand laid fiberglass is between 65-70%, which means that the fiberglass cont…… [More]
2023-10
There are many reasons that can lead to uneven surface after resin curing, but the root cause is still due to the shr…… [More]
2023-10
Generally, the density of most liquid epoxy resin adhesives is around 1.1-1.2. You can simply assume that 1kg of epox…… [More]
2023-10
Regardless of the type of polyester resin curing agent, precise matching is required, and epoxy resin is no excepti…… [More]
2023-10
Can heating be used to reduce the viscosity of epoxy resin? Yes, but there are some things you need to pay attention to.…… [More]
2023-10
Which is better, unsaturated resin or epoxy resin?This question is a bit difficult to answer directly. Any product will …… [More]
2023-10
Someone asked, can the demolding wax after use become dry and harden into blocks without sealing? …… [More]
2023-10
To be honest, don't overly believe in any model. The same epoxy resin adhesive may be labeled as 10 models by distrib…… [More]
Jiangyin Thousands Chemicals Co. Copyright © All rights reserved Privacy Policy site map sitemap.html
