What if epoxy resin does not cure?
What if epoxy resin does not cure?
First of all, would you like to confirm where the problem lies? Is the amount of curing agent added accurate? What is the curing temperature of epoxy resin? Pay attention to the substrate temperature, not the ambient temperature?
There are two main factors that affect the curing rate of epoxy resin: temperature and the amount of curing agent added. Although the type of curing agent also has an impact on the resin curing speed, since the manufacturer has recommended it to you, it is reasonable to say that it is normal. At the same time, epoxy curing agents rarely expire.
What if epoxy resin does not cure? There are two situations:
1. The amount of curing agent added is correct: You can find ways to increase the temperature, such as in the small sun, etc. After curing, the strength is basically not affected.
2. It was found that the curing dose was reduced: this is the most headache, you can try heating it to see if it can harden, usually it will not have enough strength or remain in a sticky state.
If you have any questions, it is recommended to contact the supplier as soon as possible, as they understand some details better than you.
——
