Cobalt isooctanoate PE lacquer water cobalt water promoter

PE paint accelerator promoter cobalt

Product description

                  Gel time (25 ℃):≤ 5 min

                 Appearnce :  clear purple liquid

                  Density (25 ℃):  0.900-0.922g / min

                  Resin casting body color:  original color

Storage 

The product will have some loss in weight after stored for a period of time. In order to minimize the loss in weight,Thousands Chemical recommends the highest storage temperature (Ts max.) for each product.

When stored under the recommended conditions, TC-Accelerator E will remain within the specifications of the Thousand Chemicals product for at least 6 months after delivery.

Packaging and transportation

The standard package is a 25 liter HDPE (Nourytainer®) barrel,  20 kg/barrel . Packaging and transporting comply with international regulations. For other quantitative packages please contact your Thousand Chemical sales representative.

Safety and operation

Keep the container closed, store and handle TC-Accelerator E in a dry, well-ventilated place away from sources of heat or ignition and direct sunlight.

It is forbidden to weigh and pack in the storage room.

The accelerator and the organic peroxide-based curing agent are forbiddened to be directly mixed in any case. If it directly contact with organic peroxides such as methyl ethyl ketone peroxide curing agent, a violent explosion reaction will occur, which will cause bad consequences. Therefore, the curing agent should be added to the resin first, stir well, then add the accelerator, stir evenly, then use.

For more information about the safe storage, use and handle of TC-Accelerator E, please refer to the Safety Data Sheet (MSDS). You should read the relevant safety information on the MSDS carefully before use this product.

Application

This product is the best light color accelerator for unsaturated polyester resin cured at room temperature. Usually it is used with a peroxide-inducing agent such as cyclohexanone peroxide or methyl ethyl ketone, the amount is generally about 0.5% to 2.5% of the resin.It is widely used in FRP, Polyester polywood, polyester household, artificial agate, polyester buttons, casting process, etc.

The receipe

According to the working conditions, the recommended dosage is as follows:

                  Resin : 100

                  Curing agent (methyl ethyl ketone peroxide): 1-2 (adjusted according to temperature and humidity)

                  Accelerator RCA : 1-4 (adjusted according to temperature and humidity)

The data on this product manual is accurate and reliable, but customers should still need inspect and test the product before using it to confirm that the product can be used in accordance with the client application. Jiangyin Thousands Chemical Co., Ltd. reserves all rights related to intellectual property rights.